3DBODY.TECH 2018 - Paper 18.170

Q. Tang et al., "Fast Foot Measurement System Based on 3D Measurement Network", in Proc. of 3DBODY.TECH 2018 - 9th Int. Conf. and Exh. on 3D Body Scanning and Processing Technologies, Lugano, Switzerland, 16-17 Oct. 2018, pp. 170-175, https://doi.org/10.15221/18.170.

Title:

Fast Foot Measurement System Based on 3D Measurement Network

Authors:

Qijian TANG 1, Xinyun LIU 1, Chang LIU 1, Xiaoli LIU 1, Menglong LIU 2, Xiang PENG 1,2

1 Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province, College of Optoelectronic Engineering, Shenzhen University, Shenzhen, Guangdong, China;
2 Shenzhen ESUN Co. Ltd., Shenzhen, Guangdong, China

Abstract:

A multi-node 3D foot measurement network system is proposed based on digital speckle correlation method. For each node, two cameras build a binocular system, the corresponding points between the left and right cameras are established through the spatial correlation method. In order to improve the search speed of corresponding points, the epipolar and parallax constraints are adopted. The sub-pixel corresponding point location is achieved by Newton-Raphson iterative optimization method to improve the reconstruction accuracy, and the single-node depth data is finally reconstructed based on the stereo vision principle. Multi-view depth data is matched by means of the measurement network calibration technology. The whole foot data acquisition takes less than one second, which has a great commercial application prospect.

Details:

Full paper: 18170tang.pdf
Proceedings: 3DBODY.TECH 2018, 16-17 Oct. 2018, Lugano, Switzerland
Pages: 170-175
DOI: 10.15221/18.170

Copyright notice

© Hometrica Consulting - Dr. Nicola D'Apuzzo, Switzerland, www.hometrica.ch.
Reproduction of the proceedings or any parts thereof (excluding short quotations for the use in the preparation of reviews and technical and scientific papers) may be made only after obtaining the specific approval of the publisher. The papers appearing in the proceedings reflect the author's opinions. Their inclusion in these publications does not necessary constitute endorsement by the editor or by the publisher. Authors retain all rights to individual papers.

Proceedings of 3DBODY.TECH International Conferences on 3D Body Scanning & Processing Technologies, © Hometrica Consulting, Switzerland