Conference

Next event: 3DBODY.TECH 2024, Lugano, Switzerland, 22-23 Oct. 2024

Conference topics

The technical program consist of oral presentations and live demonstrations in, but not limited to, the following technical areas:
- 3D & 4D body and 3D & 4D face scanning methods, systems and technologies
- Active 3D body scanning technologies (laser scanning, white-light scanning, RGB-D)
- Passive body scanning methods (stereo photogrammetry, visual-hull)
- Portable and hand-held human body scanning and measurement devices
- Full body scanning systems for the apparel and fashion sector
- Applications in medical sciences (plastic surgery, orthotics, prosthetics, forensics, etc.)
- Foot scanning, custom footwear and orthopedics
- Digital anthropometry, anthropometric studies
- Body measurement campaigns, fitting mannequins
- Biometrics and applications in security
- Applications in sport, health and fitness
- Human body and face modeling, animation and simulation
- Applications in virtual life, games and entertainment
- 3D body scanning for arts, sculpture and 3D printing

Please note that registration is required for all attendees and participants of the conference and exhibition. Information about registration and fees is available here.

Technical program

Program Outline

The program of the conference is structured, during two full days, in an opening session and 14 technical sessions in dual track, accommodating in total over 60 scientific and technical presentations, grouped according to various topics and application areas.

3DBST2016 Papers

The parallel technical exhibition will allow manufacturers of scanning equipment to demonstrate live their products and solutions to all attendees/visitors/participants: exhibition.

Breaks and social events are planned in order to increase the possibilities for building relationships and exchanging ideas between attendees, visitors, authors, participants and exhibitors.

The full program of the conference is available as PDF: 3dbst2016_fullprogram.pdf (1.5MB).
The program schedule only: 3dbst2016_program.pdf (0.3MB).

3DBST2016 - Program

The books of abstracts of the conference is available as PDF file:
3dbst2016_bookofabstracts.pdf.

Note: many presentations featured in the program of the conference do not have abstracts and/or papers.

3DBST2016 - Book of Abstracts

Highlights at the Conference - Opening Session with World & International Premieres

Exhibitors will announce/present world premieres at the conference and exhibition.

Size Stream (USA), 3dMD (UK/USA), botspot (Germany), ViALUX (Germany), Anatomi Metrix (Canada), Human Solutions (Germany), Chishine 3D (China), IEEE-SA (USA) will have short presentations during the opening session announcing and launching new developments, new products, new projects.

Size Stream (USA)

SizeStream
Size Stream will exhibit its new SS20 3D body scanning system with groundbreaking features, including the smallest ever footprint for a full body booth scanner (1.1 x 1.4 meters), 3D scan acquisition in 0.2 seconds, 20 sensors for total full body coverage, color data with higher resolution and higher quality. Size Stream will also announce its new Size Stream iOS Body Measurement App for 2017.

3dMD (USA/UK)
3dMD
3dMD will present for the first time at the exhibition various new products and solutions. At the opening session, Chris Lane, CEO of 3dMD, will introduce for the first time the 3dMDvexillarius Project: "Taking Temporal 3D Full Body Imaging into the field".

botspot (Germany)

botspot
botspot will present at the conference and exhibition its new 3D full body scanner OPTAone equipped with intelligent sensors with tilt-and-zoom technology - unique in the world.

ViALUX (Germany)

ViALUX
ViALUX will present for the first time internationally at the exhibition its new solution BodyLux: Medical Body Measures for Quality Compression Hosiery.

Anatomi Metrix (Canada)

Anatomi Metrix - Manu3lab
Anatomi Metrix will present Manu3 Hand Measuring System, which captures anatomical dimensions of the hand in 30 Milliseconds and whose capabilities and functionalities apply to both the world of healthcare and fashion.

Human Solutions (Germany)

Human Solutions
The Human Solutions will showcase various products and solutions at the large booth shared with Vitronic. At the opening session, Anton Preiss, Director of the Business Unit Mobility at Human Solutions, will shortly introduce their innovations.

Chishine 3D (China)

Chishine3D
Chishine 3D will present the use of 3D DSD (Digital Smile Design) in conjunction with facial scans obtained by Chishine3D BodyGo 3D face scanner.

Intel Corp. & IEEE-SA (USA)

IEEE-SA
IEEE Standards Associations and Intel will shoortly introduce the IEEE Standards Association Initiative for Accelerating Immersive Shopping Experiences by Harnessing Cutting Edge Research & Innovation for 3D Body Processing Technologies, more details will be presented at the Technical Session 10.


Highlights at the Conference - Technical Exhibition

3DBST2016 - Technical Exhibition
The technical exhibition takes place in parallel to the conference: manufacturers, developers and institutions demonstrate live 3D body scanning systems, software solutions and applications. The visitors of the exhibition have the possibility to test live the systems and to meet and discuss directly with the exhibitors: technical exhibition.


Highlights at the Conference - Research & Innovation, OEMs & Solution Providers

Universities, research institutions and private firms will present research works and innovations at the conference. Manufacturers and solution providers will present their 3D scanning systems, solutions and applications at the conference. A selection is featured here.

Technical Session 1: Medical Scanning Systems
3DBST2016
Mr DaSilva, director of research & development at Canfield Scientific, Dr Hoefling, CEO of ViALUX, Mr Gibeault, CEO of Anatomi Metrix and Prof. Xiang Zhou of Chishine3D will present their medical 3D scanning solutions at Technical Session 1.

3dMD (USA/UK)
3dMD
The CEO of 3dMD, Mr Lane, will showcase recent applications and future scenarios of high-quality 3D body scanning in the clothing industry at Technical Session 2 - Body Scanning for Apparel I.

University College Ghent (Belgium)
University College Ghent
Ms De Raeve, Head of the Fashion & Textiles Innovation Lab of the University College Ghent, will present the paper titled "Adapted Performance Sportswear" at Technical Session 2 - Body Scanning for Apparel I.

Empa (Switzerland) & ITV (Germany)
Empa
Dr Psikuta of the Laboratory for Protection and Physiology of the Swiss Federal Laboratories for Materials Science and Technology (Empa) will present the paper titled "The Impact of the Outer Layers in Multi-Layer Clothing Systems on the Distribution of the Air Gap Thickness and Contact Area" at Technical Session 2 - Body Scanning for Apparel I.

Fit3D (USA)
Fit3D
The CEO of Fit3D, Mr Moore, will held the presentation titled "Body Scanning for Fitness, Wellness, and Health" at Technical Session 3 - Body Scanning for Health, Fitness, Sport.

Novaptus Systems & The Hague Center for Cosmetic and Reconstructive Surgery (USA)
Novaptus Systems
The CEO of Novaptus Systems, Mr Stefan, will present the paper titled "New Tools for Body Image Analysis: A Modern Framework Using 3D Body Scanning" at Technical Session 3 - Body Scanning for Health, Fitness, Sport), and the paper titled "Practical Advice: Navigating the Landscape for Using 3D Body Scanners in a Medical Environment" at Technical Session 7: Medical Applications II.

Technical Session 4: Body Scanning Systems I
3DBST2016
Mr Tursky, CEO of 3D Elements, Mr Ostermeier, CEO of botspot, VITRONIC and FARO Europe will present their body scanning solutions at Technical Session 4.

University of Zurich (Switzerland)
University of Zurich
The Zurich Institute of Forensic Medicine will present the paper titled "A Mobile, Multi-Camera Setup for 3D Full Body Imaging in Combination with Post-Mortem Computed Tomography Procedures" at Technical Session 5 - Medical Applications I.

Invent Medical Group, ING Corp. & Ortopedicka protetika Frydek-Misteki (Czech Republic)
Invent Medical Group
The CEO of Invent Medical Group, Mr Rosicky, will present the paper titled "Application of 3D Scanning in Prosthetic & Orthotic Clinical Practice" at Technical Session 5 - Medical Applications I.

iMinds & RSscan International (Belgium)
iMinds
Vision Lab, a research group of iMind, of the Department of Physics of the University of Antwerp and RSscan International will present the paper titled "Foot Abnormality Mapping using Statistical Shape Modelling" at Technical Session 5 - Medical Applications I.

Technical Session 6: Body Scanning Systems II
3DBST2016
Dr Bruner, VP & CTO of Size Stream, Mr Sareen, CEO of Styku, Mr Preiss, Director of Business Unit Mobility at Human Solutions, Mr Lane, CEO of 3dMD and Mr Babin, CEO of TechMed 3D will present their body scanning solutions at Technical Session 6.

University of Milan, MarfanClinic at ASST Fatebenefratelli-Sacco, U.O. Pediatria at ASST Rhodense (Italy)
University of Milan
The Department of Biomedical Sciences for Health of the University of Milan will present the paper titled "3D Morphometric Evaluation of Craniofacial Features in Adult Subjects with Marfan Syndrome" at Technical Session 7 - Medical Applications II.

Ludwig-Maximilians-University (Germany)
Ludwig-Maximilians-University
MD Koban of the Department of Hand Surgery, Plastic Surgery and Aesthetic Surgery of the Ludwig-Maximilians-University will present the paper titled "Using Mobile 3D Scanning Systems for Objective Evaluation of Form, Volume, and Symmetry in Plastic Surgery: Intraoperative Scanning and Lymphedema Assessment" at Technical Session 7 - Medical Applications II.

Instituto de Biomecànica de Valencia IBV (Spain)
IBV
The Instituto de Biomecànica de Valencia of the Universidad Politècnica de Valencia will present the paper titled "Kidsize: Always Get the Right Size!" at Technical Session 8 - Body Scanning for Apparel II.

Niederrhein University of Applied Sciences (Germany) & Cape Peninsula University of Technology (South Africa)
Niederrhein University of Applied Sciences
Prof. Ernst of the Textile Product Development - Virtual Lab at the Niederrhein University of Applied Sciences will present the paper titled "Rapid Body Scanning Technology for a Virtual Mass Customization Process in Garment Industry" at Technical Session 8 - Body Scanning for Apparel II.

German Institutes of Textile and Fiber Research Denkendorf & Human Solutions (Germany)
German Institutes of Textile and Fiber Research Denkendorf
Prof. Fischer of the Center for Management Research at the German Institutes of Textile and Fiber Research Denkendorf will present the paper titled "Automatic morphological classification with Case-Based Reasoning" at Technical Session 8 - Body Scanning for Apparel II.

Federal Institute for Occupational Safety and Health, TU Dortmund University & Ruhr-Universitaet Bochum (Germany)
Federal Institute for Occupational Safety and Health
The Human Factors & Ergonomics Unit at the Federal Institute for Occupational Safety and Health (BAuA) will present the paper titled "Digital Assessment of Anthropometric and Kinematic Parameters for the Individualization of Direct Human-Robot Collaborations" at Technical Session 9 - Digital Anthropometry & Ergonomics.

Hohenstein Institut für Textilinnovation (Germany)
Hohenstein Institute for Textile Innovation
The Hohenstein Institute for Textile Innovation will present the paper titled "Using 3D Scanning for Improved Helmet Design" at Technical Session 9 - Digital Anthropometry & Ergonomics and the paper titled "XL Plus Men - New Data on Garment Sizes" at Technical Session 12 - Anthropometric Studies & Surveys.

Leidos, Geologics Corp., National Space Biomedical Research Institute, MEI Technologies & NASA Johnson Space Center (USA)
Leidos / NASA
Ms Young from Leidos and NASA's Anthropometry and Biomechanics Group will present the paper titled "A Parametric Model of Shoulder Articulation for Virtual Assessment of Space Suit Fit" at Technical Session 10 - Body Modeling & Processing.

IEEE-SA & Intel (USA)
IEEE-SA
IEEE Standards Associations and Intel will jointly present the "IEEE Standards Association Initiative for Accelerating Immersive Shopping Experiences by Harnessing Cutting Edge Research & Innovation for 3D Body Processing Technologies" at Technical Session 10 - Body Modeling & Processing.

ShareMy3D (Norway)
ShareMy3D
Ms Hope, co-founder and COO of ShareMy3D, will held the presentation titled "Cloud-Based Communications for 3D Data" at Technical Session 10 - Body Modeling & Processing.

astrivis (Switzerland)
astrivis
Dr Saurer, founder of astrivis, a Spinoff of ETH Zurich, will present the paper titled "Body Part Modeling on the Phone" at Technical Session 11 - Scanning Methods & Technologies I.

PROFACTOR (Austria)
PROFACTOR
Mr Heindl, ReconstructMe's project leader at PROFACTOR will present the paper titled "Photorealistic Texturing of Human Busts Reconstructions" at Technical Session 11 - Scanning Methods & Technologies I.

QuantaCorp (Belgium)
QuantaCorp
The CEO and co-founder of QuantaCorp, Mr Vandevelde, will held the presentation titled "QuantaCorp: Silhouette Based Body Measurement Using Low-Cost Devices" at Technical Session 11 - Scanning Methods & Technologies I.

Fraunhofer IOF & Technical University Ilmenau (Germany)
Fraunhofer IOF
The Fraunhofer Institute of Applied Optics and Precision Engineering IOF will present the paper titled "Accurate Irritation-Free 3D Scanning of Human Face and Body Sequences" at Technical Session 11 - Scanning Methods & Technologies I.

Leipzig University (Germany)
Leipzig University
Dr Löffler-Wirth, research group leader of the Interdisciplinary Centre for Bioinformatics at Leipzig University will present the paper titled "Novel Anthropometry Based on 3D-Bodyscans Applied to a Large Population Based Cohort" at Technical Session 12 - Anthropometric Studies & Surveys.

University of Zagreb (Croatia) & Hometrica Consulting (Switzerland)
University of Zagreb
The Faculty of Electrical Engineering and Computing of the University of Zagreb will present the paper titled "Software Synchronization of Projector and Camera for Structured Light 3D Body Scanning" at Technical Session 13 - Scanning Methods & Technologies II.

Human Solutions (Germany)
Human Solutions
Ms Rissiek, Manager Key Projects & Research at Human Solutions will held the presentation titled "From 3D Scan to Best Fit Products - A Cloud-Based Solution for Fashion and Workwear" at Technical Session 14 - Body Scanning for Apparel III.

University of Zagreb (Croatia) & University of Maribor (Slovenia)
University of Zagreb
The Faculty of Textile Technology of the University of Zagreb will present the paper titled "Analysis of Tight Fit Clothing 3D Construction Based on Parametric and Scanned Body Models" at Technical Session 14 - Body Scanning for Apparel III.



Proceedings

The proceedings of the conference (ISBN 978-3-033-05981-8, doi:10.15221/16) are available in digital form (html structure and PDF files) on USB-flash drive, CD-rom or FTP download.
The cost of the proceedings is 50CHF. For orders, please contact the conference office.
The contents of the proceedings is available as PDF file.

3DBST2016 Proceedings

The books of abstracts of the conference is available as PDF file:
3dbst2016_bookofabstracts.pdf.

3DBST2016 - Book of Abstracts

All the submitted abstracts and papers are available at the website www.3dbodyscanning.org/cap, which is dedicated to the proceedings of the serie of conferences and workshops on 3D Body Scanning & Processing Technologies.

Note: many of the presentations featured in the program of the conference do not have abstracts and/or papers.



Participants

The following institutions, universities, private companies and organizations are participating actively at the conference with presentations and/or live demonstrations.


Hometrica Consulting (Switzerland)

Size Stream
(USA)

Styku
(USA)

FARO Europe (Germany / Switzerland)

Canfield Scientific (USA / The Netherlands)

ViALUX
(Germany)

Vitronic
(Germany)

Human Solutions (Germany)

3dMD
(UK/USA)

VU University
(The Netherlands)

MOVE Research Institute (The Netherlands)

Amsterdam Fashion Institute (The Netherlands)

TNO
(The Netherlands)

Elasizer
(Russia)

Hohenstein Institut für Textilinnovation (Germany)

Reconstruct.Me
(Austria)

Profactor
(Austria)

University of Maribor (Slovenia)

Digital Human Research Center (Japan)

National Institute of Advanced Industrial Science and Technology (Japan)

Università degli Studi di Milano (Italy)

ASST Fatebenefratelli- Sacco (Italy)

ASST Rhodense
(Italy)

Università degli Studi di Pavia (Italy)

Southwest University
(China)

Novaptus Systems
(USA)

The Hague Center for Cosmetic Surgery (USA)

Polytechnic University of Tirana (Albania)

Anatoscope
(France)

Federal Institute for Occupational Safety and Health (Germany)

TU Dortmund
(Germany)

Ruhr-Universität Bochum (Germany)

ETH Zürich
(Switzerland)

astrivis
(Switzerland)

University of Zürich
(Switzerland)

Virtopsy
(Switzerland)

Federal University of Paranà (Brazil)

Body & Life
(Brazil)

University College Ghent (Belgium)

botspot
(Germany)

Inst. de Biomecánica de Valencia (Spain)

ShareMy3D
(Norway)

Invent Medical
(Czech Republic)

ING corporation (Czech Republic)

Ortopedicka protetika Frydek-Mistek
(Czech Republic)

Ivanovo State Polytechnic University (Russia)

Wuhan Textile University (China)

Lockheed Martin Corp. (USA)

Universities Space Research Association (USA)

National Space Biomedical Research Institute (USA)

Geologics Corp. (USA)

MEI Technologies (USA)

NASA Johnson Space Center (USA)

Ludwig Maximilians University (Germany)

Shanghai Jiao Tong University (China)

Fitizzy Fiiting Expert Solutions (France)

ENSAIT-GEMTEX
(France)

Niederrhein Univ. of Applied Sciences (Germany)

Cape Peninsula Univ. of Technology (South Africa)

University of Antwerp (Belgium)

EMPA
(Switzerland)

Inst. of Textile Tech. and Process Eng. (Germany)

Iowa State University (USA)

iMinds - Vision Lab (Belgium)

RSscan International (Belgium)

German Inst. of Textile and Fiber Research (Germany)

University of Zagreb
(Croatia)

Warsaw Univ. of Techn. (Poland)

Kitman Labs
(Ireland)

Royal College of Surgeons in Ireland (Ireland)

Humbolt University of Berlin (Germany)

University of Brescia (Italy)

University of Naples Federico II (Italy)

3D Elements
(Austria)

King Saud University
(Saudi Arabia)

Leipzig University
(Germany)

Anatomi Metrix
(Canada)

TechMed 3D
(Canada)

IEEE-SA
(USA)

intel
(USA)

Shape Analysis
(UK)

Medical Faculty Skopje (R. Macedonia)

Xi'an Chishine Optoelectronics Technology (China)

Fit3D
(USA)

Palo Alto
(Switzerland)

QuantaCorp
(Belgium)

Texel
(Russia)



Attendees

Representatives from the following institutions, universities, private companies and organizations are attending/participating/visiting the conference and/or exhibition.
Note: list (alphabetical order) updated continously.

255 hec srl, Italy
3Dabout.me BV, The Netherlands
3D Elements GmbH, Austria
3dMD Ltd., UK/USA
3D Printhuset A/S, Denmark
Accommodation Specialists Brokers Ltd., Malta
adidas AG, Germany
Alvanon HK Ltd, Hong Kong
Anatomi Metrix Inc., Canada
ART3DMUSEUM, USA
Asoc. Instituto Biomecanica Valencia, Spain
Astrivis AG, Switzerland
Bauerfeind AG, Germany
Beijing Leatech Co. Ltd., China
Berkeley University, USA
Berne University of Applied Science, Switzerland
Bioracer, Belgium
Bioracer Motion, Belgium
Body Aspect, UK
BODYGEE AG, Switzerland
BodyRecog Metrics Inc., USA
botspot GmbH, Germany
Brno University of Technology, Czech Republic
Brooks Brothers Inc., USA
Brooks Brothers Europe Srl., Italy
BSN medical GmbH, Germany
Bundeswehr, Germany
Cadscan Ltd., UK
Callegari S.r.l., Italy
Canfield Scientific Inc., USA
CarréCouture, Belgium
Centro Pediatrico del Mendrisiotto SA, Switzerland
Chishine 3D, China
COLObrands, USA
Columbia Sportswear Company, USA
Concept of Health, Switzerland
Decathlon SA, France
Defence Science and Technology Laboratory (Dstl), UK
DIM3 SA, Belgium
DITF Denkendorf, Germany
doob group AG, Germany
EFI Optitex, Israel
Eclo Inc., USA
Elasizer, Russia
ELIS, France
Else Corp Srl., Italy
Empa, Switzerland
EQT sp. z o.o., Poland
Event Management, Italy
FARO Europe, Switzerland
Federal Institute for Occupational Safety and Health, Germany
Fashion Metric Inc., USA
FitWithMe, Serbia
Fit3D Inc., USA
Fraunhofer Institute IOF, Germany
Garma Z S.C., Spain
Global Scanning A/S, Denmark
Hays AG, Germany
Hochschule Niederrhein, Germany
Hohenstein Institut für Textilinnovation gGmbH, Germany
Hometrica Consulting, Switzerland
HUAWEI TECHNOLOGIES Duesseldorf GmbH, Germany
HUGO BOSS AG, Germany
Human Solutions GmbH, Germany
Human Solutions of North America Inc., USA
iBody Ltd., UK
IEEE-SA, USA
IGOODI S.r.l., Italy
ING corporation s.r.o., Czech Republic
Intel Corp., USA
Intel Israel Ltd., Israel
Innocampus AG, Switzerland
Institut Osteopathische Medizin, Switzerland
ITAIC, France
I-Ware Laboratory Co. Ltd., Japan
Jackal Trick Ltd., UK
JEANS.CH AG, Swtizerland
JP Dental Systems, Switzerland
King Saud University, Saudi Arabia
Lectra, France
Leidos, USA
Livemile, UAE
Ludwig-Maximilians-University Munich, Germany
Magic Leap Inc., USA
MAS Technology Services, Sri Lanka
Mawashi Science and Technology, Canada
Micieli Consulting GmbH, Switzerland
Milimetar, Serbia
Metail Ltd., UK
Ministry of Defence, The Netherlands
Mohn Media, Germany
mPort Ltd., Australia
MySizeID, Israel
NASA, USA
Niederrhein University, Germany
Nomura Research Institute Inc., Japan
Novaptus Systems Inc., USA
Objex Unlimited, Canada
Palo Alto SA, Switzerland
Photuro 3D, Israel
Picanova GmbH, Germany
Plowman Craven Ltd., UK
Printing Portal, UK
PROFACTOR GmbH, Austria
QuantaCorp, Belgium
Salomon SAS, France
Seoul National University, S. Korea
Shape Analysis Ltd., UK
ShareMy3D, Norway
Shining3D Tech Co., China
Sistemi Assyst s.r.l., Milan
SIGVARIS Management AG, Switzerland
Size Stream LLC., USA
Smart Garment People Ltd, UK
Sony Europe Ltd., Italy
Southwest University, China
STARAMBA SE, Germany
STA-SAMS, Switzerland
Styku LLC., USA
SUPSI, Switzerland
Target Corp., USA
TechMed 3D, Canada
Technodigit / Hexagon, France
Texas A&M University, USA
Texel Inc., Russia
Triumph Global Sales AG, Switzerland
Triumph Intertrade AG, Switzerland
Triumph International AG, Germany
Trya Srl, Italy
Università degli Studi di Brescia, Italy
Università degli Studi di Milano, Italy
University College Ghent, Belgium
University Leipzig, Germany
University of Ankara, Turkey
University of Antwerp, Belgium
University of Naples Federico II, Italy
University of Maribor, Slovenia
University of Skövde, Sweden
University of Texas at Austin, USA
University of Zagreb, Croatia
University of Zurich, Switzerland
UPT, Albania
ViALUX Messtechnik + Bildverarbeitung GmbH, Germany
VITRONIC Dr.-Ing. Stein Bildverarbietungssysteme GmbH, Germany
Vorum Research Corp., Canada
VU University, The Netherlands
Wuhan Textile University, China
Xi'an Chishine Optoelectronics Technology Co. Ltd., China
Xi'an Jiaotong University, China
Y.O.U., UK
YouDome, Monaco



Supporters and Partners

The following oragnizations and companies are supporting or are partners of the conference.
Note: preliminary list.

Hometrica Consulting - Dr. Nicola D'Apuzzo
www.hometrica.ch
    CrossRef
www.crossref.org
Hometrica Consulting - Dr. Nicola D'Apuzzo (Switzerland) is organizing the series of 3DBST conferences and exhibitions. Hometrica Consulting is a leading international consulting firm in the sectors of 3D human body scanning technologies.     Hometrica Consulting and 3DBST are affiliated to CrossRef indexing system. DOI (digital object identification) numbers will be assigned to the single papers published in the proceedings of the conference.
Canton Ticino
www.ti.ch/invest
   
INVEST IN TICINO is a territorial marketing initiative of Canton Ticino (Switzerland) which, through its Economic Promotion Office, intents to increase the international stature of Canton Ticino, raise awareness on Ticino's investment opportunities, promote corporate investment and establishment.    

Amiconi Consulting
www.amiconiconsulting.ch
   
Lugano Turismo
www.luganoturismo.ch
Amiconi Consulting is supporting the conference. The service company takes care of the hotel reservations for attendees of the conference and provide on request private transportation from and to Milan airports.     The tourist organization of Lugano is supporting the conference. The tourist office provide any tourist information regarding Lugano and surrounding areas.
7th International Conference and Exhibition on 3D BODY SCANNING TECHNOLOGIES, Lugano, Switzerland, 30 November - 1 December 2016